Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

Optimized IR synchrotron beamline design

Synchrotron infrared beamlines are powerful tools on which to perform spectroscopy on microscopic length scales but require working with large bending‐magnet source apertures in order to provide intense photon beams to the experiments. Many infrared beamlines use a single toroidal‐shaped mirror to focus the source emission which generates, for large apertures, beams with significant geometrical aberrations resulting from the shape of the source and the beamline optics. In this paper, an optical layout optimized for synchrotron infrared beamlines, that removes almost totally the geometrical aberrations of the source, is presented and analyzed. This layout is already operational on the IR beamline of the Brazilian synchrotron. An infrared beamline design based on a SOLEIL bending‐magnet source is given as an example, which could be useful for future IR beamline improvements at this facility.     

Electron irradiation-enhanced core/shell organization of Al(Cr,Fe, Mn)Si dispersoids in Al–Mg–Si alloys

The age hardening 6061-T6 aluminium alloy has been chosen as structural material for the core vessel of the material testing Jules Horowitz nuclear reactor. The alloy contains incoherent Al(Cr, Fe, Mn)Si dispersoids whose characterization by energy-filtered transmission electron microscopy (EFTEM) analysis shows a core/shell organization tendency where the core is (Mn, Fe) rich, and the shell is Cr rich. The present work studies the stability of this organization under irradiation. TEM characterization on the same particles, before and after 1 MeV electron irradiation, reveals that the core/shell organization is enhanced after irradiation. It is proposed that the high level of point defects, created by irradiation, ensures a radiation-enhanced diffusion process favourable to the unmixing forces between (Fe, Mn) and Cr. Shell formation may result in the low-energy interface segregation of Cr atoms within the (Fe, Mn) system combined with the unmixing of Cr, Fe and Mn components.     

Contribution of Cytosine‐Containing Cyclobutane Dimers to DNA Damage Produced by Photosensitized Triplet–Triplet Energy Transfer

Mutagenic cyclobutane pyrimidine dimers (CPDs) can be induced in DNA through either direct excitation or photosensitized triplet–triplet energy transfer (TTET). In the latter pathway, thymines are expected to receive the excitation energy from the photosensitizer and react with adjacent pyrimidines. By using state‐of‐the art analytical tools, we provide herein additional information on the formation of cytosine‐containing CPDs. We thus determined the yield of all possible CPDs upon TTET in a series of natural DNAs with various base compositions. We show that the distribution of CPDs cannot be explained only by excitation of individual thymines. We propose that the mechanism for TTET involves at least dinucleotides as the minimal targets. The observation of the formation of cytosine–cytosine CPDs also suggests that additional pathways are involved in this photosensitized reaction.     

Unraveling the Crystal Structure of Lanthanide–Murexide Complexes: Use of an Ancient Complexometry Indicator as a Near‐Infrared‐Emitting Single‐Ion Magnet

Herein, we provide some structural evidence of the complexation color‐change of murexide solutions in presence of lanthanide, which has been used for decades in complexometric studies. For Ln=Sm to Lu and Y, the compounds crystallize as monomeric [Ln(Murex)₃] ? 11 H₂O with an N3O6 tricapped square‐antiprism environment, which are stable up to 250 °C. Single‐ion magnet (SIM) behavior is then observed on the Yb^III derivative in an original nine‐coordinated environment. In‐field slow relaxation (Δ=(15.6±1) K; τ₀=2.73×10^?6 s) is observed with a very narrow distribution of the relaxation time (α_max=0.09). Magnetic and photophysical properties can be correlated. On one hand the analysis of NIR emission spectrum permits to have access to crystal field parameters and to compare them with those extracted from dc measurements. On the other hand, magnetic measurements permit to identify the nature of the M _J states involved in the ²F_5/2→²F_7/2 luminescence spectrum. The gap between the low‐lying states is in agreement with the energy barrier obtained from magnetic slow‐relaxation measurement.     

A preliminary study on the development and characterisation of enzymatically grafted P(3HB)-ethyl cellulose based novel composites

In the present study, a novel enzyme-based grafting of poly(3-hydroxybutyrate) [P(3HB)] onto the ethyl cellulose (EC) as a backbone polymer was developed under a mild and ecofriendly environment and laccase was used as a grafting tool. The resulting composites were characterised using various instrumental and imaging techniques. The high intensity of the 3,358 cm^?1 band in the FTIR spectra showed an increase of hydrogen–bonding interactions between P(3HB) and EC at that distinct wavelength region. The morphology was examined by scanning electron microscopy, which showed the well dispersed P(3HB) in the backbone polymer of EC. X-ray diffraction pattern for P(3HB) showed distinct peaks at 2-theta values of 28°, 32°, 34°, 39°, 46°, 57°, 64°, 78° and 84°. In comparison with those of neat P(3HB), the degree of crystallinity for P(3HB)-g-EC decreased. The tensile strength, elongations at break and Young’s modulus of P(3HB)-g-EC reached the highest levels in comparison to the film prepared with pure P(3HB) only, which was too brittle to measure any of the above said characteristics. Results obtained in the present study suggest P(3HB)-g-EC as a potential candidate for various biotechnological applications, such as tissue engineering and packaging.     

Functionalization of a Ruthenium–Diacetylide Organometallic Complex as a Next‐Generation Push–Pull Chromophore

The design and preparation of an asymmetric ruthenium–diacetylide organometallic complex was successfully achieved to provide an original donor–π–[M]–π–acceptor architecture, in which [M] corresponds to the [Ru(dppe)₂] (dppe: bisdiphenylphosphinoethane) metal fragment. The charge‐transfer processes occurring upon photoexcitation of the push–pull metal–dialkynyl σ complex were investigated by combining experimental and theoretical data. The novel push–pull complex, appropriately end capped with an anchoring carboxylic acid function, was further adsorbed onto a semiconducting metal oxide porous thin film to serve as a photosensitizer in hybrid solar cells. The resulting photoactive material, when embedded in dye‐sensitized solar cell devices, showed a good spectral response with a broad incident photon‐to‐current conversion efficiency profile and a power conversion efficiency that reached 7.3 %. Thus, this material paves the way to a new generation of organometallic chromophores for photovoltaic applications.     

Third-Generation Solar Cells: Toxicity and Risk of Exposure

Solar energy is considered clean energy, and its use is predicted to increase in the near future. Most installed units today are crystalline solar cells, but the field is in constant development, and when the first dye sensitized solar cell was published by Grätzel and O'Reagan a new, third-generation, solar power was born. Highly toxic metals are used to produce the photovoltaic units today, and with the predicted increase in solar cell installation, the human health hazards of these panels could become an issue. Additionally, many of these materials are used in their nanoform, which is associated with an additional risk. In this article, we discuss the technology behind the third-generation solar cells with its valuable use of nanotechnology as well as the possible health hazard when such nanomaterials are used in solar power units. We will show that the main exposure will occur either during the development and production phases or at the end-of-life stage of the solar cells, where toxic material can leach into landfills, and subsequently into the environment and impact the ecosystem directly, or humans indirectly through edible plants or drinking water.